Olivetti d-Copia 3000MF, Operation Manual

Page: 187 / 230

Troubleshooting
6-6 OPERATION GUIDE
Cannot connect to
Authentication Server. – Press [End] and check the following
items:
• Registration to Authentication
Serve
• Password and computer address
for Authentication Server
• Connection of Network
—
Cannot duplex print
this paper type. Did you select a paper size/
media type that cannot be
duplex printed? Select the available paper size/media
type.
Press [Continue] to print without
duplex printing. 3-16
Cannot execute this
job. – This job is canceled because it is
restricted by Job Accounting. Press
[End]. —
Cannot offset this
paper type. Did you select a paper size
(A3, B4, A5-R, B6-R, Folio,
Ledger, Statement and 8K)
that cannot be offset? Select the available paper size.
Press [Continue] to print without
using Offset. 3-19
Cannot staple this
paper type. Did you select a paper size/
type that cannot be stapled? Select the available paper size/type.
Press [Continue] to print without
using Staple. —
Check the cover. Is there any cover which is
open? Close the cover indicated on the
touch panel. —
Check the document
processor. Is the document processor
open? Close the document processor. —
Is the top cover of the
document processor open? Close the top cover of the document
processor. 6-25
Check the finisher. Is the built-in finisher or the
document finisher set
correctly? Set the built-in finisher or the
document finisher correctly. For
details, refer to
the respective
Operation Guides .
—
Is the built-in finisher tray set
correctly? Set the built-in finisher tray correctly. —
Clean the slit glass. – Clean the slit glass using the
attached cleaning cloth. 5-3
Failed to specify Job
Accounting. – The job is canceled. Press [End]. —
Failed to store job
retention data. – The job is canceled. Press [End]. —
Error Message Checkpoints Corrective Actions
Reference
Page