Olivetti d-Copia 3000MF, Operation Manual

Page: 175 / 230

Maintenance
5-10 OPERATION GUIDE
10
While gently holding the grid
cleaner in place with your left
hand, pull the main charger out
fully and then push it back to a
position where the roller
A
does not quite reach the white
pad on the grid cleaner.
Repeat this procedure 2 or 3
times.
CAUTION:
When pushing the main charger back in, take care not to push
it all the way in. This could result in damage to copies.
11 With the main charger pulled out
about 5 cm (2 inches), remove the
grid cleaner. Then push the main
charger back in fully, applying
pressure in the direction shown by
the arrow so that the main charger
is in its designated position.
12 Install a new waste toner box.
13 Remove cleaning brush (blue
colored).
A