Oliver 4065, Owner'S Manual, Page: 8 / 88

8 |
Page Oliver Machinery 4065 Table Saw
Table
Stock Number 4065.002 4065.003
Material Precision Ground Cast Iron
Main Table Dimensions 35-13/16“(L) x 39”(D)
Extension Table Dimensions 42-1/2”(L) x 39”(D)
Overall Table Size 78-5/16” (L) x 39”(D)
Table Height from Floor 34-3/8”
Main Table Flatness Tolerance 0.01”
Overall Table Flatness Tolerance 0.025”
Distance from Front Edge to
Blade
14-7/8” (at max blade height) 14” (at max blade height)
Distance from Rear Edge to
Blade
10-1/2” (at max blade height) 9-1/4” (at max blade height)
Miter Slot Type T-Slot (Standard Size)
Miter Slot Size (W x H) 3/4” x 3/8”
Blade Alignment /w Miter Slot <= 0.0079”
Table Insert Provided Zero clearance insert
Included Blade Information
Stock Number 4065.002 4065.003
Type General-purpose 72T blade General-purpose 80T blade
Size 14” 16”
Kerf 9/64” (3.5mm)
Blade Plate Thickness 3/32” (2.5mm)
Miter Gauge
Angle Range -60° to 60°,with positive stops at -30°, 45°, 0°, 30°, 45°
Miter Bar Length 19-1/8”
Fence Dimensions 12-3/4” (L) x 2-13/16” (H)
Fence Type Extruded Aluminum with T-Slot for 1/4” Bolts
Motor
Stock Number 4065.002 4065.003
Motor Type TEFC
Horsepower 7.5HP 10HP
Power Requirement 230V / 460V, 3Ph, 60Hz
Full Load Current Rating 19.5A @ 230V 27.5A @ 230V
9.5A @ 460V 13.5A @ 460V
Efficiency 82.2% 82.6%
Power Factor 89.8% 85.3%
Speed 3450 RPM
Power Transfer Mechanism Poly V-Belt
Bearing type Permanently Sealed Ball Bearing