manualshive.com logo in svg

Oliver 4065, Owner'S Manual, Page: 18 / 88

Share
Download
Oliver 4065 Owner'S Manual Download Page 18

18 | 

Page 

Oliver Machinery 

4065 Table Saw

 

Receiving 

Your shipment should  arrive in multiple packages. Upon receiving your shipment, please verify all 

packages are delivered. Check for any significant damages before signing the delivery confirmation. 

 

The entire table saw shipment comes in four wood crates: 
1.

 

Table saw main unit with accessories. 

2.

 

Table saw fence assembly. 

3.

 

Extension table assembly. 

4.

 

Table saw rail assembly. 

 

Moving the shipment into the shop 

Your machine will be delivered by freight service, and it will be left outside of your workshop by default. 

On the day of delivery, please be sure help is available to move the machine to its final location. 

WARNING

 

The  total weight  of  the  4065 Table Saw  shipment is 1092 lbs

,

  and  the fully 

assembled saw weighs  814 lbs.  Safe moving techniques and proper lifting 

equipment are required, or serious personal injury may occur. 

 

WARNING

 

Your packages may be secured by the straps. Do not lift your packages by the 

strap. They are not designed to hold the total weight of your package. They may 

snap without warning and cause serious injury and machine damage. 

 

 

IMPORTANT

 

If items are missing or damaged, please call us immediately at 

1-800-559-5065 

Summary of Contents for 4065

























































































Reviews:

No comments