Oliver 4065, Owner'S Manual, Page: 17 / 88

4065 Table Saw OLIVERMACHINERY.NET
17 |
Page
Setup
Shop Preparation
Space Requirement
The dimensions of the table saw are 82“(L) x 48”(D). You will need
additional space for manipulating your workpiece, auxiliary support
table/rollers, electrical connection, and dust collection.
Load Limits
The entire shipment has a shipping weight of 1092 lbs., and the fully assembled table saw has a net weight
of 814 lbs. Please ensure all lifting tools and building structures have adequate load capacity for
transporting and supporting the total weight of this machine, the operator, and related items.
Electricals
Make sure a properly sized circuit and electrical outlet are available near the machine. Please refer to
“Electricals” on page 14 for details regarding electrical requirements.
Lighting
Adequate lighting is needed to operate this machine. Overhead, non-glare lighting should be installed.
Safety Labels
If this machine introduces a new safety hazard to your workplace, please display proper warning signs in
highly visible locations.
Dust Collection
Wood dust created by this table saw is a health hazard. Connect this machine to a dust collection system.
Check air suction strength regularly to ensure dust and shavings are effectively removed. High-quality
dusk masks should be available for using the table saw.
CAUTION
Air resistance and leakage in a dust collection system will impact its effectiveness.
Use a dust collection system that is rated above 500 CFM at the dust port. Doing
so improves air quality in the workplace and prevents the machine from jamming.