37
Figure 59. Remove black hose and cut the tube (a
–
b)
2.
Cut with the help of a nipper the metal wire inside the grey tube, see Figure 60 a. Hold the metal wire tip
with some scotch tape. See Figure 60 b.
Figure 60. Cut the metal wire and hold the metal wire with scotch tape (a
–
b).
3.
Insert the black hose back in its position, see Figure 61
Figure 61. Insert the black hose.
Okolab suggests to cut the tubes in order to save space especially when:
1.
the Heating Box is put on the same desk of the enclosure, very close to the enclosure (see Figure 62 for
Configuration A). Figure 62 a shows configuration where tubes have not been cutting. Figure 62 b shows the
space-saving after cutting the tubes.
