8
3.
8-pins cable (x1).
To connect the connector labe
led ‘Control Unit’ on the H201 T Heating Box with the
connector l
abeled ‘Heating Box’ on the Temperature Control Unit
(see paragraph7.1).
4.
3-pins
–
Flow Sensor Cable (x1).
To connect the flow sensor attached on the Blue Side of Heating Box
to the connector labeled ‘Air flow sensor’ on the Tem
perature Control Unit (see paragraph 7.1).
5.
Flexible tubes, TUBE J (x4)
(pointer 10 in Figure 1). To connect the Heating Box to the enclosure (two
tubes to attach the RED side of the Heating Box to hoses on the BACK of the enclosure and other two
tubes to attach the BLUE side of the Heating Box to hoses on the TOP of the enclosure) (see paragraph 10
6.
Power supply cable.
To connect the Heating Box.
7.
Okolab incubating chamber
(see pointer 12 in Figure 1)
with lid and base, chamber riser with one or
more plate adapters.
8.
OKO-TOUCH
(see point 13 in Figure 1), including:
−
Touch Screen Interface
−
#1 RS232 Serial cable
. To connect the Touch Screen to the T-Unit
−
MINI-USB-OTG cable
. To connect a USB pen to the OKO-TOUCH for data download.
Touch Screen Interface
RS232 Serial cable
Figure 2. Oko-touch components.
Optional Equipment
•
H201-T-FILTER-BOX
, including:
1.
H201-T-FILTER-KIT, Pre filter
and
HEPA filter
