Okolab H201-T-UNIT-BL, Manual

Page: 7 / 50

7
4 Supplied equipment
H201-T-UNIT-BL includes:
1. T-Unit (pointer 1 in Figure 1)
2. Heating Box (pointer 2 in Figure 1)
3. Fine Gauge Thermocouple (pointer 3 in Figure 1). To measure specimen temperature
4. NTC Thermistor (pointer 4 in Figure 1). To measure ambient temperature
5. #1 24V-DC Power Adapter (pointer 5 in Figure 1) . To connect the Temperature Control Unit
2
6
1
3 4
5
7
12
13
10
Figure 1. H201-T-UNIT-BL equipment overview.
5 NOT supplied equipment
H201-T-UNIT-BL can be equipped with:
1. Microscope enclosure (pointer 6 in Figure 1)
2. HM-VF , standard humidity control, that includes:
•
Humidity Module (pointer 7 in Figure 1)
•
Water Trap (see paragraph 10 Figure 56 )
•
TUBE G (x1) . Silicon tube, 3 mm ID, connected by a plastic connector with a silicon tube 2 mm ID. The
3 mm ID silicone end must be connected to the Output Water Trap, while the 2 mm ID silicone tube to
the Chamber Incubator. See Figure 66.
•
TUBE H (x1). Silicon tube, 3 mm ID. To connect the Humidity Module Output to the Water Trap Input.
See Figure 66.
•
TUBE I (x1) : Polyurethane tube, 4 mm OD, 45 mm long. To connect the Input of the gas coming from
the Gas Mixer to the Humidity Module. See Figure 66.