5
3
Safety Notes
In order to achieve maximum performance and to ensure proper operation of your new equipment, please
read carefully the following safety notes and the instructions. If you have any question, please contact Okolab.
−
The equipment must only be used as intended and as described in this Manual.
−
Equipment should be operated only by technically qualified personnel.
−
Do not start up the equipment if some of its parts are damaged.
−
This instrument is not intended for use in locations subject to flammable or explosive gases.
−
Transport the equipment with care.
−
Equipment and its internal parts can be damaged by dropping and by shock.
−
Not following these instructions can result in damage or breakdown of the device and its
accessories.
−
Avoid rapid changes in ambient temperature which may cause condensation, avoid direct air
draft from air conditioner, exposure to direct sunlight and excessive heat accumulation.
−
The products labels can be found on the bottom panel of the Main Unit.
−
Do not disassemble any part of the system.
−
Do not disconnect cables while in operation.
−
Do not use a volatile solvent such as paint thinner to clean the instrument because deformation
or discoloration may occur.
−
Use a soft, dry cloth to remove stains from the instrument.
−
Do not exceed voltage indicated in this manual and on the product label.
−
Avoid excessive induction noise, static electricity and magnetic fields.
−
Do not expose this instrument to rain or moisture.
−
Prevent throttling and kinking of tubing.
−
Check tubing time to time for possible material usage.
−
Check that all tubing is well inserted into the connectors so they cannot slip off
−
This device is not designed for use for medical applications.
−
Power cord of unit should be unplugged from electrical outlet when left unused for a long period
of time.
−
Do not start up the equipment if the supply cable is damaged.
−
Connect the equipment only to grounded mains power socket.
−
Do not open the unit. Do not remove cover or back.
−
Prevent metal fragments or lead wire scraps from falling inside instrument to avoid electric
shock, fire or
malfunction.
−
No user serviceable parts inside.
−
Unit should never be used where it can fall or be pushed into water.
