Description of the heating controller module
45
17
Description of the heating controller module
The heating controller is designed to control the heat distribution in a heating system. It consists of a casing with an
internal circuit board and terminals. The cover plate of the casing is removable.
Electric shock danger
Make sure before opening, that the whole heating system is
powered down.
Note
The heating controller is protected up to 8A total current consumption. Each output may be occupied with 2 A.
Make sure that these values are not exceeded by the connected devices.
1
Bus connecting terminal RS485 A and B
5
Fuse 8 A (slow-acting) limits the current
consumption of the heating controller.
2
Address switch
6
Low voltage – area (dangerous voltage)
3
Slot for an optional power supply
(The power supply is needed when the burner
control CMP 06.2 is used. The power supply
takes over the bus supply.)
7
Extra low voltage (PELV)
4
Fuse 6,3 A (fast) for X31 and X33
E1389EN 2.0
Operating manual Pelletronic Touch
