11 / 62
10 / 62
3 ASSEMBLY
3.1 NECESSARY TOOLS
No additional tools are required to assemble the OKM Delta Ranger.
Do not open the device and/or accessories. There are no end user serviceable parts inside.
3.2 ATTACH PROBE
Probes shall always be attached in the prescribed way matching the Probe Socket Pins.
Make sure the Probe Connector and Socket Pins
are clean before assembly!
NOTICE
Depending on the measurement, attach the probe to the Probe Socket:
1
2
Plug the Probe Connector into the Probe
Socket. Note the correct position of the pins!
Push carefully until the notch snaps in with a
noticable click sound.
3.3 ATTACH SMARTPHONE
3
4
Lift the Smartphone Mount.
Attach the smartphone to the magnet.
3.4 DETACH PROBE
1
2
Press and hold the notch of the
Probe Connector to release the Probe.
Pull out the Probe carefully as specified by
the Probe Fitting.
11 / 62
ASSEMBLY