38 / 62
39 / 62
2
Select Customized to adjust the parameters
individually.
3
Auto: The length is determined by pressing
the trigger at the end of the first scan line.
1
Start the operating mode Thermo Scan by
tapping on the option in the App main menu.
2
Select Default to use the preset parameters
for fast scans.
6
Confirm by pressing Start Scan.
Set the Field Length by tapping on
+
and
-
.
3
1 ft ... 160 ft: The length is defined before the
scan. All lines will stop automatically.
Toggle to set the Impulse Mode.
4
Automatic: The impulses (scan values) will
be recorded continuously without any break.
4
Manual: Every single impulse (scan value) is
recorded by pressing the trigger.
5
Parallel: Scan all lines in the same direction.
5
Zigzag: Scan all scan lines forwards and
backwards alternately.
Toggle to set the Scan Mode.
6
Confirm by pressing Start Scan.
8
Continue with section
.
Ready to start your Thermo Scan.
7
Searching for a GPS Signal (if enabled).
5.8 THERMO SCAN
Use the operating mode Thermo Scan to visualize hidden structures such as rooms, caves and
tunnels based on noticeable temperature deviations of surfaces. These visualizations allow
further analyses in Visualizer 3D Studio.
5.8.1 Configure Measurement
Make sure you have connected the Thermo Probe (T).
This operating mode allows horizontal (short-range) and vertical
probe orientation.