background image

32 / 62

33 / 62

5.7.2 Perform Default 3D Ground Scan

The default parameters Field Length: Auto | Impulse Mode: Automatic | Scan Mode: Parallel 

are recommended for entry-level detector users and allow scanning in slightly sloping terrain. 

3

Return to your first starting point without 

scanning and take one step to the left: This 

is the starting point of the second scan line.

1

Go to the starting point of the first scan line 

(bottom right corner). 
Press the trigger to start scanning. Start 

walking as soon as you press the trigger.

2

Walk to the end of the first scan line. Press 

the trigger as soon as you reach its end  

to set the field length for the following lines.

The scan image will be generated line by 

line to help you to follow your progress while 

measuring.
The first scan lines may initially look incor-

rect. However, the inconsistent scan image 

will stabilize in the course of the scan.

6

Complete the measurement by tapping on 

Finish Scan  . 
Confirm saving with 

 or discard the scan  

with 

.

4

Press the trigger to start scanning. Start 

walking as soon as you press the trigger. 
Walk parallel to your first scan line and at the 

same speed. The impulse sound should stop 

at the end of the line.

7

If you chose to save the scan, enter the Field 

Length and Field Width that you actually 

measured.

8

The scan file is opened in the File Explorer – 
se

5.10 File Explorer on page 44

.

5

Return to the last starting point and take a 

step to the left (without scanning): This is the 

starting point of the next scan line.
Press the trigger to start scanning and walk 

at the same speed until you reach the end of 

the scan line.
Repeat this to scan as many lines as you like.

Summary of Contents for Delta Ranger DR-A01

































Reviews: