background image

52 / 62

53 / 62

The Compass Calibration failed.

You moved too fast or too slowly. 

The probe was pivoted while calibrating. 

There are too many ferromagnetic interferences 

in the area (e.g. power lines).

Retry calibration: Press the trigger and start rotating as slowly as described in 

4.7 Calibrate 

Compass on page 18

Retry calibration: Hold the detector horizontally during the complete calibration process. 

Press the trigger and start rotating.
Retry calibration in a place where there are less magnetic interferences. Make sure there 
are no power lines above or a electric fences near you. The Compass may not work indoors.

3D Ground Scan does not start. Instead, I see the 
following screen:

GPS is trying to locate your position.

Make sure there are no interfering barriers like a roof or dense trees above the smart-
phone to allow GPS tracking. GPS tracking does not work indoors.

You should switch off GPS in the Settings menu to disable GPS.

Thermo Scan does not start. Instead, I see the 
following screen:

GPS is trying to locate your position.

Make sure there are no interfering barriers like a roof or dense trees above the smart-
phone to allow GPS tracking. GPS tracking does not work indoors.

You should switch off GPS in the Settings menu to disable GPS.

My scan data look unusual and/or seem to be 
incorrect.

The sensor range has been exceeded. 

 
The internal batteries are too low. 

The detector is too close to other electric  
or magnetic devices, or in atmospheric  
conditions such as lightning prevail.

Make sure you hold and move the probe in the correct orientation  
according to the recommendations of the selected operating mode. 
 
Charge the detector batteries – see 

4.1 Charge Internal Batteries on page 13

. 

 

Keep at least 160 ft (50 m) distance to magnetic fields, electric motors, speakers, phones, 
keys, and jewelry. Avoid using the detector during thunderstorms – see 

5.1 Pacemakers on 

page 23

.

NOTES

                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     

Summary of Contents for Delta Ranger DR-A01

































Reviews: