OKM Delta Ranger DR-A01, User Manual

Page: 5 / 32

8 / 62 9 / 62
2.1 CONTROL UNIT
VIII
I
IX
VI
III
II
VII
IV
V
I Smartphone Mount – see 3.3 Attach Smartphone on page 11 .
II LED Lighting to illuminate dark areas.
III Probe Fitting with Probe Socket to ensure that the probe is plugged in correctly – see 3.2 Attach Probe on page 11 .
IV Charger Socket (USB-C) to charge the Control Unit with LED Indicator to show the charging state while charging the internal battery – see 4.1 Charge Internal Batteries on page 13 .
V Label with device information like Serial Number and Model Number – see 6.3 Register/Verify Detector on page 47 .
VI Laser Pointer to set the crosshairs position – see 4.6 Set Crosshairs Position on page 17 .
VII Knob to calibrate the Bionic Sensors – see 5.4.1 Calibrate Bionic Sensors on page 24 .
VIII Trigger with LED to switch the Control Unit on and off. Control and confirm various functions. The ring-shaped LED indicates 4 connection states:
Flashing Green The Control Unit is switched on and waiting for a connection. No probe is connected and the App is not connected.
Permanently Green The Control Unit is switched on and successfully connected to the probe, but the App is not connected.
Flashing Blue The Control Unit is switched on and connecting/connected to the App, but no probe is connected.
Permanently Blue The Control Unit is switched on and successfully connected to the probe and to the App.
IX Handle with Electrodes – see 5.4.1 Calibrate Bionic Sensors on page 24 .
2.2 ANDROID SMARTPHONE
The Control Unit is controlled via an Android smartphone App. For detailed information refer to
the respective sections in this manual. For further settings and information beyond the use of
the OKM App, refer to the smartphone manual.
2.3 CHARGER AND TRAVEL ADAPTER
The Control Unit is charged via charger. For detailed information refer to 4.1 Charge Internal
Batteries on page 13 . In some countries the use of the Travel Adapter may be required.
2.4 WIRELESS HEADPHONES
The Android smartphone can be paired with wireless headphones via Bluetooth. For detailed
information refer to
4.5 Pair Wireless Headphones on page 17 . For further settings and infor-
mation, refer to the smartphone and headphones manuals respectively.
2.5 PROBES
The OKM Delta Ranger is equipped with various probes according to the acquired edition:
Long-Range
Probe (L)
Thermo
Probe (T)
Ground Scan
Probe (G)
III
I
II
I Probe Label
II Probe Connector
III Notch
For correct assembly see
3.2 Attach Probe on page 11 .
2.6 PROTECTOR CASE
The device and its accessories are stored and transported in a Protector Case –
see
1 TRANSPORTATION AND STORAGE on page 5 . For further information, refer to the
Protector Case Care and Instructions.