OKM Delta Ranger DR-A01, User Manual, Page: 26 / 32

50 / 62 51 / 62
The operating mode won't start and I see the
following screen: The required probe is not connected. Plug in the Long-Range Probe (L). See 3.2 Attach Probe on page 11 .
The operating mode won't start and I see the
following screen: The required probe is not connected. Plug in the Ground Scan Probe (G). See 3.2 Attach Probe on page 11 .
The operating mode won't start and I see the
following screen: The required probe is not connected. Plug in the Ground Scan Probe (G). See 3.2 Attach Probe on page 11 .
The operating mode won't start and I see the
following screen: The required probe is not connected. Plug in the Thermo Probe (T). See 3.2 Attach Probe on page 11 .
The operating mode won't start and I see the
following screen: The required probe is not connected. Plug in the Thermo Probe (T). See 3.2 Attach Probe on page 11 .
The Laser Pointer does not power on. The Laser Pointer is available via the Settings
menu or in the crosshairs calibration mode of
Bionic Stream, Ionic Stream or Thermo Stream. Select the proper menu and tap on the Crosshairs Calibration icon – see
4.6 Set Crosshairs Position on page 17 .
LASER RADIATION
Avoid Direct Eye Exposure!
The Sensor Calibration indicator in the Bionic
Stream does not move. The hand is not touching the electrodes. Grasp the handle so that the palm and all fingers touch the electrodes on both sides. With
the other hand, turn the knob and confirm the desired value by tapping in the App – see
5.4.1 Calibrate Bionic Sensors on page 24 .
I don't get best values during Bionic Stream
calibration. The fingers that touch the electrodes have been
moved during calibration. Grasp the handle so that the palm and all fingers touch the electrodes on both sides. With
the other hand, turn the knob and confirm the desired value by tapping in the App instead
of pushing the trigger on the handle – see
5.4.1 Calibrate Bionic Sensors on page 24 .