background image

 

 

SMS Alert Alarm / Plus

 

 

Page 1 of 1  

The range 

SMS Alert 9

 

SMS Alert 9 is developed to connect to an existing alarm system or equipment to be monitored and controlled. It 
is a

 

9 input

,

 and 

3 switched

 

relay output

 

unit that keeps you in constant contact with your home or business. It 

notifies you instantly when the inputs are triggered by sending an SMS or missed call to 

four

 cellphones. You 

can phone the unit and listen in for possible intruders.  As it is bi-directional, you can also send the unit SMS 
messages and control remote systems. SMS Alert 9 can be configured as a two-way intercom system using a 

Base Station intercom

The input strings and phone numbers of the users are programmable by the 

user.

 

 

Examples:

 AC Loss/Restore, motion detection; temperature monitoring; computer server room control; 3-phase 

imbalance; over/under voltage monitoring; field monitoring by using solar energy; opening of electric gates; 
steamer room control & monitoring; farm water pump control and monitoring; air conditioning monitoring and 
control; access control and monitoring, etc.

 

 

SMS Alert 1 

 

SMS Alert 1 works on the same principle than SMS Alert 9, but it is smaller and less expensive. It is a 
programmable 

dual single input

,

 and 

1 switched relay output

 device.  The dimensions are approximately 

155mm x 75mm x 55mm.  It reports to 

four

 cellphones. 

 

Input 1:  (Dual option) 

Can be set to send a SMS on both a 

Negative apply

 or 

Negative remove

 trigger. The SMS that will be send is 

Programmable. 

 

Examples

:

 Open your car with your cell phone when you accidentally locked your key in your car; receive a  

SMS when your car alarm is on; activate pepper gas in your car; switch boiler rooms on, etc.

 

 

SMS Alert 9 Alarm /Plus 

 

SMS Alert Alarm / Plus is a lockup-and-go alarm and does not require an existing alarm system. It is a 

9 input,  

1 switched relay output

,

 LED and Siren output device. You can arm or disarm your SMS Alert Alarm via 

 SMS, remote control or key switch. It reports to 

four

 cellphones. 

 

 

 

        

SMS Alert 9 Intercom 

 

This is an upgraded SMS Alert 9 that connects to a BPT intercom system. This system enables your visitors to  
call and talk to you from your intercom by pressing a button, where after you can open your gate via SMS. The  
user can change the phone number as required. It reports to 

four

 cellphones.

Summary of Contents for SMS Alert 9









Reviews: