Oki ML1120, Technical Reference Manual

Page: 37 / 254

Technical Reference Guide – Operator interface > 37
Printer offline
PRINTER STATE
SWITCH
DESELECT (I.E. OFFLINE)
CONT. FORMS CUT-SHEET
SEL Sets printer on-line Sets printer on-line
LF/FF Performs a line feed Performs continuous
line feeding. Ejects the
cut sheet.
LOAD/EJECT Feeds forms or loads
paper
Feeds forms or ejects
paper
TEAR Feeds paper to the tear
or print position
Invalid
SEL + LF/FF Selects font type See
“note” on page 36.
Selects font type See
“note” on page 36.
SEL + LOAD/EJECT Selects font pitch See
“note” on page 36.
Selects font pitch See
“note” on page 36.
SEL + TEAR (ML1120
only)
Selects print speed See
“note” on page 36.
Selects print speed See
“note” on page 36.
LF/FF + LOAD/EJECT Invalid Invalid
LF/FF + TEAR Invalid Invalid
LOAD/EJECT + SEL Microfeed down:
ML1120 eco: 0.176mm
(1/144 in)
ML1190 eco: 0.141mm
(1/180 in)
Microfeed down:
ML1120: 0.176 mm (1/
144 in) step.
ML1190: 0.141 mm (1/
180 in) step.
LOAD/EJECT + LF/FF Microfeed up:
ML1120 eco: 0.176mm
(1/144 in)
ML1190 eco: 0.141mm
(1/180 in)
Microfeed up:
ML1120 eco: 0.176 mm
(1/144 in) step.
ML1190 eco: 0.141 mm
(1/180 in) step.
LOAD/EJECT + TEAR Invalid Invalid
TEAR + SEL Microfeed down ( See
“note” on page 36. ):
ML1120 eco: 0.176 mm
(1/144 in) step.
ML1190 eco: 0.141 mm
(1/180 in) step.
Microfeed down ( See
“note” on page 36. ):
ML1120 eco: 0.176 mm
(1/144 in) step.
ML1190 eco: 0.141mm
(1/180 in) step.