Oki ML1120, Technical Reference Manual

Page: 231 / 254

Technical Reference Guide – Appendix D – Media specifications > 231
of about 3 mm between parts. Stapling with metal staples is
strictly prohibited.
Spot gluing
> Forms are to be spot glued at both sides (single-side spot
gluing is not allowed).
> Each glue application spot must be glued evenly, and be of
3 to 5 mm in size. The glue spot is to be accurately
pressed to prevent its floating and there is to be no
significant creasing.
> For positioning of glue spots, see the illustration below.
> Spot gluing is to be applied in a staggered format.
Gluing the lines
> The glue line area should be even, with a width of 1 –
2 mm.
> Always press the glue line area to prevent any lifting.
Further, do not use any paper which has significant
wrinkling.
> Ensure that the glue does not extend outside the margins
of the paper.
Glue spot
)
s
e
h
c
ni
2(
m
m
8.
0
5
tr
a
p
t
s
1
tr
a
p
d
n
2
tr
a
p
dr
3
tr
a
p
ht
4
tr
a
p
ht
5