background image

Technical Reference Guide – Preface > 2

P

REFACE

Every effort has been made to ensure that the information in this document is 
complete, accurate, and up-to-date. Oki Printing Solutions assumes no 
responsibility for the results of errors beyond its control. Oki Printing Solutions also 
cannot guarantee that changes in software and equipment made by other 
manufacturers and referred to in this guide will not affect the applicability of the 
information in it. Mention of software products manufactured by other companies 
does not necessarily constitute endorsement by Oki Printing Solutions.

While all reasonable efforts have been made to make this document as accurate and 
helpful as possible, we make no warranty of any kind, expressed or implied, as to 
the accuracy or completeness of the information contained herein.

The most up-to-date drivers and manuals are available from the Oki Printing 
Solutions web site:

http://www.okiprintingsolutions.com

Copyright © 2007 Oki Printing Solutions.

Oki, OKI Printing Solutions and Microline are registered trademarks of Oki Electric 
Industry Company, Ltd.

ENERGY STAR is a trademark of the United States Environmental Protection Agency.

Microsoft, MS-DOS and Windows are registered trademarks of Microsoft 
Corporation.

Other product names and brand names are registered trademarks or trademarks of 
their proprietors.

As an ENERGY STAR Program Participant, the manufacturer has 
determined that this product meets the ENERGY STAR guidelines 
for energy efficiency.

This product complies with the requirements of the Council 
Directives 89/336/EEC (EMC) and 73/23/EEC (LVD) as amended 
where applicable on the approximation of the laws of the member 
states relating to electromagnetic compatibility and low voltage.

Summary of Contents for ML1120































































































































































































































































Reviews: