background image

List of the Device Setting Menu Items

- 82 -

Admin Setup

In the following menu, you can change the settings that need the administrator authority.

Memo

To enter the [

Admin Setup

] menu, an administrator password is necessary. The default password is "aaaaaa".

If you change the default setting from the [

Admin Setup

] menu, and want to reflect the changed default on the start screen 

immediately, press <

RESET/LOG OUT

> key or press the function switch key which is any of <

Copy

>, <

Scan

>, <

Print

> and 

<

FAX/HOOK

>.

Copy Setup

E-mail 

Setting

Authentication method

Sets the authentication method.

SMTP User ID

Set the login name to the server used for SMTP authenti-

cation. The maximum valid number of characters is 64.

SMTP Password

Set the password to the server used for SMTP authentica-

tion. The maximum valid number of characters is 64.

The default value is NULL.

POP3 Server

Set the IP address or server name for the POP3 server. 

This is required for "POP before SMTP" authentication. 

The default value is NULL.

POP User ID

Set the login name for the server used for POP authenti-

cation or E-mail To Print (printing received E-mail). The 

maximum valid number of characters is 64.

When POP before SMTP authentication is used, it is nec-

essary to set the character string after the "@" from the 

E-mail address set as the sender's (From) E-mail 

address. The default value is NULL.

POP Password

Set the password for the server used for POP authentication 

or E-mail To Print (printing received E-mail). The maximum 

valid number of characters is 16. The default value is NULL.

"Copy Setup"

"Fax Setup"

"Internet Fax Setup"

"Scanner Setup"

"Print From USB Memory Setup"

"Print Setup"

"Network Menu"

"Management"

"User Install"

Item

Factory 

Default

Description

Default 

Settings

Scan Size

A4 or Letter

Sets the default scan size.

Duplex Copy

OFF (Do not 

do both sides)

Sets the duplex (2-sided) function off or 

on.

Zoom

100%

Sets the default zoom ratio.

Sort

ON

Sets whether to collate copied documents 

by default.

Image Settings Density

0

Sets the default density of images.

Document Type

Text/Photo

Sets the default print quality when scan-

ning documents.

Resolution

Normal

Sets the default setting of resolution.

Background Removal

3

Sets the default setup of the background removal.

Contrast

0

Sets the default setting of contrast.

Direction

Portrait

Selects the default page orientation of 

documents.

ID Card Copy

OFF

Sets whether to use the ID card copy 

mode by default.

Continue Scan

OFF

Sets whether to use the continuous scan mode.

Item

Description

Summary of Contents for MB441MFP

















































































































































































Reviews: