Oki MB441MFP, User Manual

Page: 83 / 176

List of the Device Setting Menu Items
- 83 -
Config
uring
at t
h
e Oper
ator P
anel
6

Fax Setup
Default
Settings
Mixed Size OFF Sets whether different sized documents
are copied on each size paper as the
default.
Margin Margin OFF Sets the default settings of margins.
Margin Front Left 0 Available rage: 0 to
±
25 mm
(0.0 to 1.0inches) (1 mm/ increment)
Top
Back Left
Top
Edge Erase Setting ON Sets whether to erase the shade created
in the surrounding of 2-page spread docu-
ments as the default.
Width 2 mm
(0.1 inch) Sets an erasing width.
Available range:2 to 50 mm
(0.1 to 2.0 inches).
Item
Factory
Default
Description
Default
Settings Resolution Normal Sets the default setting of image quality.
Density 0 Sets the default density of images.
Scan Size A4 or Letter Sets the default scan size.
Continue Scan OFF Sets whether to use the continue scan
mode.
TTI ON Sets whether to add the sender's name to
the header of the transmitted fax.
Transmit Confirmation Report ON or OFF Sets whether to print the result of the
transmission automatically.
Memory Tx ON Sets whether to use memory transmission
(ON) or real-time transmission (OFF).
Fcode
Box Edit/Register Confidential
Box Box Name (NULL) Sets the name of confidential boxes. Maxi-
mum 16 characters.
Sub-Address (NULL) Sets the sub-address for your confidential
box. Maximum 20 characters.
Hold Time 0 Sets the hold time for your confidential
box. Available range: 00 to 31 days.
I.D.Code (NULL) Sets the password for your confidential
document box. Four characters from 0 to
9 (numbers only).
Bulletin Box Box Name (NULL) Sets a bulletin box name. Maximum 16
characters.
Sub-Address (NULL) Sets a sub-address for your bulletin box.
Maximum 20 characters.
Delete Deletes an Fcode box.
Security
Function ID Check Tx OFF Sets whether to use the ID check trans-
mission.
Broadcast Destination ON Sets whether to indicate the destination
number before starting broadcast trans-
mission.
Confirm Dial OFF Sets whether to reenter the destination
fax number before sending a fax.
Item
Factory
Default
Description