Oki MB441MFP, User Manual

Page: 87 / 176

List of the Device Setting Menu Items
- 87 -
Config
uring
at t
h
e Oper
ator P
anel
6

Scanner Setup
Item
Factory
Default
Description
Default
Settings Scan Size A4 or Letter Sets the default scan size.
Image Settings Density 0 Sets the default density of images.
Document Type Text/Photo Sets the image quality of the documents.
Background Removal 3 Sets the default setup of the background
removal.
Resolution 200 dpi Sets the default resolution setting.
Contrast 0 Sets the default contrast setting.
Hue 0 Sets the default red-green color balance.
Saturation 0 Sets the default saturation setting.
RGB 0 Sets the default RGB contrast.
Continue Scan OFF Sets whether to perform continuous scan
as the default.
Grayscale OFF Sets whether to scan a monochrome job
in grayscale or in black and white.
File Format Color PDF Selects the default file format. [ Color ] /
[ Mono (Grayscale) ] can be selected
from PDF, TIFF, JPEG, and XPS. [ Mono
(Binary) ] can be selected from PDF, TIFF,
and XPS.
Mono (Grayscale) PDF
Mono (Binary) PDF
Encrypted PDF
Setting Document Open Password (NULL) Sets the default password to open an
encrypted PDF.
The same password with the authentica-
tion password cannot be used. Maximum
32 characters.
Permissions Password (NULL) Sets a default password to control printing
or editing on an encrypted PDF. The same
password with the Document open pass-
word cannot be used. Maximum 32
characters.
Display Default Password Disable Sets whether the registered password is
displayed or not displayed on the pass-
word selection screen for the document
open password or authentication pass-
word.
[
Disable ]: Displays the registered default
password using * instead of each charac-
ter.
[
Enable ]: Displays the registered default
password as it is.
Compression
Rate Color Low Selects a default compression level.
Mono (Grayscale) Low
Mono (Binary) High
Edge Erase Setting OFF Sets whether to erase the edge shadow
created in the surrounding of 2-page
spread document.
Width 5 mm
(0.2 inch) Sets an erasing width. Available range: 5
to 50 mm (0.2 to 2.0 inches).