Oki LAN 6200E User Manual Download Page 99

Page: 99 / 230

OkiLAN 6200e Plus User’s Guide

TCP/IP

System Requirements

OkiNet for TCP/IP is a Windows-based program which

is compatible with Windows 3.x, Windows NT/2000

and Windows 95/98/Me.

OkiNet for TCP/IP requires that the TCP/IP protocol is

running using a Winsock (Windows Sockets) TCP/IP

stack, version 1.1 or greater. A Winsock TCP/IP proto-

col stack is available from many vendors including the

following:

•

Microsoft

•

FTP Software

•

Trumpet

•

NetManage

•

Distinct

For more information on the Winsock TCP/IP stack

and setting up a host name, see the README file.

Running OkiNet for TCP/IP

To run the utility, double-click on the OkiNet icon. The

main

OkiNet for TCP/IP

screen appears.

Summary of Contents for LAN 6200E







































































































































































































































Search results

Summary of Contents for LAN 6200E

Reviews:

Related manuals for LAN 6200E

Brands by name

Popular brands

Oki LAN 6200E, User Manual

Search results

Summary of Contents for LAN 6200E

Reviews:

Related manuals for LAN 6200E

Brands by name

Popular brands