Oki LAN 6200E User Manual Download Page 44

Page: 44 / 230

OkiLAN 6200e Plus User’s Guide

Novell NetWare

OkiNet for NetWare

OkiNet for NetWare Overview

This section contains information about how to config-

ure the Network Print Server in Bindery and NDS envi-

ronments using the OkiNet for NetWare utility.

Feature

PServer Mode

RPrinter/NPrinter

Mode

User Con-

nection

Requires one Net-

Ware user connec-

tion per Network Print

Server.

Requires no user con-

nection.

Perfor-

mance

High performance.

Good performance.

Installation

Easier to set up.

Requires fewer steps.

More steps to set up, but

works well with existing

utilities.

Print Server

Separate print server

node, print server

functions, and Net-

Ware print server soft-

ware not required.

Requires NetWare print

server software. Inte-

grates with NetWare

print utilities.

Status

Reporting

Printer status is

reported via mes-

sages sent to client

nodes. Job status is

available via job notifi-

cation. Printer status

available via OkiNet

utilities.

Printer status is reported

via PCONSOLE, PSC,

and print server screen.

Job status is reported

via the print server

screen, PSC, job notifi-

cation.

Security

Without superior inter-

vention, other print-

ers cannot access

data sent to the

queues. Data can be

password protected

from the file server to

the printer.

Data can be password

protected from the file

server to the printer.

Summary of Contents for LAN 6200E







































































































































































































































Search results

Summary of Contents for LAN 6200E

Reviews:

Related manuals for LAN 6200E

Brands by name

Popular brands

Oki LAN 6200E, User Manual

Search results

Summary of Contents for LAN 6200E

Reviews:

Related manuals for LAN 6200E

Brands by name

Popular brands