Oki LAN 6200E User Manual Download Page 197

Page: 197 / 230

OkiLAN 6200e Plus User’s Guide

Troubleshooting

197

Message:

There is not enough memory to perform the

requested action.

Recommended Action:

Closing windows or quitting

application programs on the Macintosh can make

more memory available.

Message:

This option is not valid while the port is dis-

abled. Enable the port before using this option.

Recommended Action:

Cannot reconfigure the

device while the port is disabled.

Message:

Unexpected AppleTalk error.

Recommended Action:

Check the network connec-

tion. Try again.

Selecting Your Printer

To Select Your Printer

1. Click on the

Apple

in the menu bar and select

Chooser

2. Click on the

Print Driver

icon. If a caution box

appears, click

If the Print Driver icon doesn’t appear in the left side of

the box, the Printer Resource files are not installed, or

you may have installed the Printer Resource files in a

different System Folder.

If AppleTalk is inactive, a caution dialog box will

appear on your screen. Click

. The Active button

will be selected.

Summary of Contents for LAN 6200E







































































































































































































































Search results

Summary of Contents for LAN 6200E

Reviews:

Related manuals for LAN 6200E

Brands by name

Popular brands

Oki LAN 6200E, User Manual

Search results

Summary of Contents for LAN 6200E

Reviews:

Related manuals for LAN 6200E

Brands by name

Popular brands