OkiLAN 6200e Plus User’s Guide
TCP/IP
79
TCP/IP
Introduction
TCP/IP Overview
This section contains instructions and information on
how to configure your Network Print Server. You will
also be instructed on how to set up your host comput-
ers to print to the Network Print Server using the TCP/
IP protocol.
The Network Print Server supports TCP/IP methods
for printing:
•
Remote Line Printer Daemon (LPD)
•
File Transfer Protocol (FTP)
•
Printing directly through a TCP port (Raw Port
Printing)
Additionally, if the DHCP protocol is enabled as a
default, the print server may be accessed through an
ordinary Internet Web browser, such as Netscape
Navigator, or by using TELNET.
Software Requirements
The Network Print Server may be configured for TCP/
IP using the OkiNet for TCP/IP utility, or from a com-
puter supporting the OkiNet for NetWare utility, or TEL-
NET and one of the following:
•
Manual
arp
table entry and
ping
•
Static route entry using route add command
•
DHCP
