OKI Data Infotech Corporation CONFIDENTIAL
Chapter 7 Adjustment
7-23
5.
With the
Up
and
Down
buttons, select
ADJUST FOR 1 COLOR
, then press the
OK
button.
6.
With the
Up
and
Down
buttons, select
the color of the print head to adjust, then
press the
OK
button.
Note
Only one print head can be adjusted at a time
during single color adjustment.
7.
Press the
OK
button.
8.
The carriage moves to the wiping
position for the selected print head and
stops with the third wiper blade turned
upward.
9.
Check the position of the wiper blade to
the nozzle guard.
How to check the position
- Check visually that the wiper blade extremity enters the groove on the nozzle guard, as shown in
the pictures below.
>> WIPER POS ADJUST
ADJUST FOR 1 COLOR
◎
>>>ADJUST FOR 1 COLOR
OK?
◎
CHECK WIPING POSITION
OK?
◎
>>>ADJUST FOR 1 COLOR
CC
◎
>>>ADJUST FOR 1 COLOR
Lc
◎
Wiper blade extremity
2.5 mm
3.0 mm
Nozzle guard groove
Summary of Contents for IP-6620
Page 567: ...OKI Data Infotech Corporation CONFIDENTIAL Appendix 5 Appendix 4 Blower Fan Wiring Diagram...
Page 568: ...OKI Data Infotech Corporation CONFIDENTIAL Appendix 6 Appendix 5 Actuator Wiring Diagram...
Page 572: ...OKI Data Infotech Corporation CONFIDENTIAL Appendix 10 Appendix 9 Subtank Unit Wiring Diagram...