OKI Data Infotech Corporation CONFIDENTIAL
Chapter 7 Adjustment
7-24
Note
To move the carriage to the maintenance
side: enter a positive value
To move the carriage to the cap side: enter a
negative value
If the wiper blade extremity is not in the nozzle guard groove, write down the size of the gap in
unit of 0.1 mm, and press the
OK
button.
If the wiper blade extremity enters the nozzle guard groove, press the
OK
button.
10.
The wiper blade returns to its home
position, then the carriage moves to the
home position.
The wiping position of the selected print head is displayed.
-
+
CARRIAGE IS MOVING
PLEASE WAIT
✓
The wiper blade extremity should enter in the
nozzle guard groove.
The wiper blade extremity is above the
nozzle guard (in the black circle).
Summary of Contents for IP-6620
Page 567: ...OKI Data Infotech Corporation CONFIDENTIAL Appendix 5 Appendix 4 Blower Fan Wiring Diagram...
Page 568: ...OKI Data Infotech Corporation CONFIDENTIAL Appendix 6 Appendix 5 Actuator Wiring Diagram...
Page 572: ...OKI Data Infotech Corporation CONFIDENTIAL Appendix 10 Appendix 9 Subtank Unit Wiring Diagram...
