OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations
3-74
(6)
DRAIN 1 INK COLOR
Note
Before performing this procedure, open the COVER(CENTER)-F and remove the
COVER(R)ASSY-MW (see
If you start the procedure before removing the COVER(R)ASSY-MW, you will have to performed
the procedure again with the COVER(R)ASSY-MW removed after finishing it once by opening the
COVER(CENTER)-F.
Select
DRAIN 1 INK COLOR
with the
Up
and
Down
buttons, and then press the
OK
button.
Move the cursor with the
Right
and
Left
buttons, and toggle a digit with the
Up
and
Down
buttons.
A digit that has been toggled disappears.
Finish the selection and press the
OK
button.
Install the jig SINGLE COLOR FILLING TOOL(MV) and press the
OK
button.
for how to use the SINGLE COLOR FILLING TOOL(MV).)
Check that a waste ink bottle is installed and press the
OK
button.
Press the
OK
button after you have installed the jig.
(CIS model)
Press the
OK
button and open the ink box cover.
INSTALL
XXXXXXX
INK SUCTION TOOL
◎
OPEN INK BOX COVER
>>DRAIN 1 INK COLOR
BOTTLE IS EMPTY?
◎
>>DRAIN 1 INK COLOR
PRINT HEAD : 1 3
◎
>>DRAIN 1 INK COLOR
PRINT HEAD : 1234567
◎
>PH MAINTENANCE
DRAIN 1 INK COLOR
◎
Summary of Contents for IP-6620
Page 567: ...OKI Data Infotech Corporation CONFIDENTIAL Appendix 5 Appendix 4 Blower Fan Wiring Diagram...
Page 568: ...OKI Data Infotech Corporation CONFIDENTIAL Appendix 6 Appendix 5 Actuator Wiring Diagram...
Page 572: ...OKI Data Infotech Corporation CONFIDENTIAL Appendix 10 Appendix 9 Subtank Unit Wiring Diagram...
