Oki ES7470dn, Manual

Page: 62 / 96

SENDING/RECEIVING A FAX
- 62 -
1
2
3
4
5
6
Note
• Do not place any heavy objects (8 Kg(18lb.) or over) on
the document glass and do not press on it with force.

Original scanning range
The following figures show the original scanning area. Any
information in the shaded area is not printed on the paper.

Placing the original(s) on the
document glass
This section describes how to set an original on the document
glass. Originals are sent in the order they are placed on the
document glass.
Do not place any heavy objects (8 kg/18 lb. or over) on the
document glass and do not press on it with force.
Breaking the glass could injure you.
1
Raise the Original Cover or RADF
(Reversing Automatic Document Feeder),
and place the original with its face down on
the glass.
2
Align the original against the left inner
corner of the glass.
• Different size originals can also be sent in one
transmission.
• When an original size is placed in the direction shown
in the upper figure, transmission to a recipient is
carried out so that the pre-entered sender information
is printed in position A in the figure.
• When an original size is placed in the direction shown
in the lower figure, transmission to a recipient is carried
out so that the pre-entered sender information is
printed in position B in the figure.
Location
Maximum
size
Paper weight Original size
Document
glass Length:
355.6mm
(14")
Width:
215.9mm
(8.5")

A4, A5, B5,
Folio, Letter,
Legal13,
Legal13.5,
Legal14,
Statement
RADF Length:
355.6mm
(14")
Width:
215.9mm
(8.5")
60 - 105 g/m
2
(15.9 -
27.9 lb.)
A4, A5, B5,
Folio, Letter,
Legal13,
Legal13.5,
Legal14
2 mm
(0.08 inch) 2 mm
(0.08 inch)
2 mm
(0.08 inch)
2 mm
(0.08 inch)
A
B