SENDING/RECEIVING A FAX
- 63 -
1
2
3
4
5
6
• The pre-entered sender information shows what is
registered in the Terminal ID.
Advanced Guide
3
Lower the Original Cover or RADF slowly.
Placing the original(s) on the RADF
This section describes how to set the original(s) on the RADF
(Reversing Automatic Document Feeder). When the originals
are placed on the RADF, the uppermost page is the first to be
scanned and sent.
• When scanning the duplex original with the RADF, do
not put your hand on the RADF. Paper may damage the
hand.
• When scanning the duplex original with the RADF, do
not put an object on the RADF. This could cause a paper
misfeed.
1
After aligning the originals, place them with
their face up and slide the guides to rest
against the edges of the originals.
• Regardless of size, documents can be set to 100
sheets (80g/m
2
(20 lb.)) or size 10mm (0.39inch) max.
• 2-sided originals can be set and sent.
Advanced Guide
• When an original size is placed in the direction shown
in the upper figure, transmission to a recipient is
carried out so that the pre-entered sender information
is printed in position A in the figure.
• When an original size is placed in the direction shown
in the lower figure, transmission to a recipient is carried
out so that the pre-entered sender information is
printed in position B in the figure.
• The pre-entered sender information shows what is
registered in the Terminal ID.
Advanced Guide
Sending documents of different sizes
The automatic 2-sided document feeder can be used to set
documents of different sizes together. The following
combinations of document sizes are possible.
• Other than North America: A4, Folio
• North America: Letter, Legal, Legal 13
Memo
• To send different width originals, you need to enable
“MIXED ORIGINAL SIZES” as a transmission condition.
P.64 "Setting the transmission conditions"
Precautions for using the RADF
Do not use the following originals as they may misfeed or
become damaged:
The following originals should be handled carefully:
A
B
(1) Badly wrinkled or folded originals. In
particular, originals whose leading edge
are curled may fail to be fed.
(4) Clipped or stapled originals
(2) Originals with carbon paper
(5) Originals with holes or torn originals
(3) Taped, pasted or clipped (cut out)
originals
(6) Damp originals (7) OHP film originals
(1) Folded or curled originals should be smoothed out
before being used.
(2) Originals sticking to each other, or originals that are
surface-treated may fail to separate properly.
Summary of Contents for ES7470dn
