1
2
3
4
5
6
HOW TO MAKE COPIES
- 28 -
●
HOW TO MAKE COPIES
Before Making Copies
Storage of color copies
When storing color copies, be careful of the following:
• Avoid a place exposed to light. The colors may fade when
they are stored in such a place for a long time.
• If copies are stored pressed between plastic sheets made
of chloroethylene for a long time, toner may melt and stick
to the plastic. For long-time storage, use polyethylene
binders.
• When a color copy is folded, toner at the folded part may
flake off. Do not fold color copies when storing them.
• Toner on copies may melt if it touches solvent or ink not
fully dried. Keep copies away from them.
• When copies are left under an extremely high temperature
environment such as in the vicinity of a heater, toner may
melt. Store them at room temperature and avoid extreme
temperature changes.
Placing Originals
Acceptable originals
When the RADF (Reversing Automatic Document Feeder) is
used, 2-sided originals can be automatically scanned one
sheet after another. When the document glass is used,
originals such as OHP films, tracing paper, booklet or
3-dimensional objects, that cannot be placed on the RADF can
be scanned, as well as plain paper.
Note
• Automatic size detection does not work properly when A/B
format originals are used in equipment for North America. It
does not work properly when LT format originals are used in
equipment other than that for North America.
• In some models, automatic size detection does not work
properly when K format paper is used for printing. (K format
is a standard paper size in China.)
• Do not place any heavy objects (8 Kg(18lb.) or over) on the
document glass and do not press on it with force.
• Be sure to place A5-size originals in a landscape direction
when using the RADF.
• A maximum of 1000 sheets can be scanned per 1 copy job
or up until the embedded memory becomes full.
Placing originals on the document glass
The document glass can be used for originals such as OHP
films or tracing paper, as well as plain paper, that cannot be
placed on the RADF.
Do not place any heavy objects (8 Kg(18lb.) or over) on the
document glass and do not press on it with force.
Breaking the glass could injure you.
1
Raise the RADF.
2
Place the original with its face down on the
document glass and align it with the left
rear corner of the glass.
Location
Maximum
size
Paper
weight
Accetable sizes for
automatic size
detection
Document
glass
Length:
215.9mm
(8.5")
Width:
355.6mm
(14")
20mm or
less
Document size cannot
be detected
automatically.
RADF
60 to
105 g/m
2
Other than North
America:
mixed-size setting is
disabled:
A4, A5, B5, Folio
mixed-size setting is
enabled:
A4, Folio
North America:
Letter, Legal, Legal13
Summary of Contents for ES7470dn
