Oki ES4161 MFP, User Manual

Page: 37 / 182

Advanced Operations for Scanning, Internet Faxing and Scanning to Fax Server
- 37 -
Sc
ann
ing
3
8
Select [ Enter ] and then press .
9
Re-enter the password.
10
Select [ Enter ] and then press .
11
Press the to select [ Enable ] from
[ Disable ], [ Enable ] and [ Apply
Default Password ] and then press .
Set the authentication password.
12
Press the and then enter the password.
13
Select [ Enter ] and then press .
14
Re-enter the password.
15
Select [ Enter ] and then press .
16
Select the permission to print the
document and then press .
- When the encryption level is set to [ Low ] in step
5, you can select [ Not Allowed ] or [ High
resolution ].
- When the encryption level is set to [ Middle ] or
[High] in step 5, you can select [ Not Allowed ]
[ low resolution (150dpi) ] or [ High resolution ].
17
Select the permission to copy the text
and object and then press .
18
Select the permission to change the PDF
file and then press .
- When the encryption level is set to [ Low ] in step
5, you can select [ Not Allowed ], [ Allow To
Make A Comment ], [ Allow To Swap Page ], or
[ Allow all op. except pg extract. ]
- When the encryption level is set to [ Medium ] or
[ High ] in step 5, you can select [ Not Allowed ],
[ Allow To Make A Comment ], [ Allow Ins., Del.
or Rotate Page. ], or [ Allow all op. except pg
extract. ]
19
Check the security settings and then
press .
Note

The settings of each authentication in steps 16 to 18 are
displayed only when [
Permissions Password ] is set for
[ Enable ] or [ Apply Default Password ]
Use the default password
When [ Use the default password ] is selected
in step 6 or 11 in "Setting a password for
opening a document and authentication
password" P. 36 , you can use the default
password registered in advance.
Use the procedures below to register the initial
password.
1
Press the < SETTING > key.
2
Press the to select the [ Admin
Setup ] and then press .
3
Enter the administrator password.
4
Select [ Enter ] and then press .
5
Press the to select [ Scanner Setup ]
and then press .
6
Press the to select [ Default
Settings ] and then press .
7
Press the to select [ Encrypted PDF
Setting ] and then press .
8
Press the to select [ Document Open
Password ]/[ Permissions Password ]
and then press .
9
Enter a password up to 32 characters.
10
Select [ Enter ] and then press .
11
Press the until the top screen is
displayed.
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK