List of the Device Setting Menu Items
- 86 -
Other
Settings
Redial Tries
2 times
Sets the number of redial attempts.
Available range: 0 to 9 times.
Redial Interval
1 minute
Sets the time between redial attempts.
Available range: 1 to 5 minutes.
Block Junk Fax Setting
OFF
Sets the mode of Block Junk Fax.
Registered
List
Register/Edit (No Entry)
Register/Edit addresses for Block Junk Fax.
Display condition: [
Admin Setup
]>[
Other
Settings
]>[
Block Junk Fax
]>[
Setting
] is
set to [
Mode2
].
Delete
(Nothing: con-
nect Item cell
and Factory
default cell)
Delete addresses for Block Junk Fax. Dis-
play condition: [
Admin Setup
]>[
Other
Settings
]>[Block Junk Fax]>[
Setting
] is
set to [
Mode2
].
Ring Response
1 ring
Sets the number of rings required before
receiving an incoming fax.
Dialling Pause Duration
2 seconds
Sets the dial pause time.
Available range: 0 to 10 seconds.
Rx Reduc. Rate
Auto
Sets the reception reduction rate.
Reduc. Margin
24 mm or 3.9
inch
Sets the threshold level of reception
reduction.
Available range: 0 to 100 mm
(0 to 3.9 inches).
ECM Mode
ON
Sets whether to use the error correction
mode.
PreFix
NULL
Sets the dialing prefix. Maximum 40 dig-
its.
Received Time Stamp
OFF
Sets whether the time stamp is printed on
incoming faxes.
Print Check Message
ON
Sets whether the error content is reported
when a transmission error occurs.
Fax
Setting
Service Bit
OFF
If set OFF, some menu items are not dis-
played on the panel.
Country Code
International
or U.S.A or
Australia(Sin-
gapore)
Sets the country code.
A/R Full Print
ON
Sets whether to print the list of the com-
munication results automatically after
every 50 communications.
Tone For Echo (For Transmission)
Disable
It only shows, when ServiceBit = ON.
Tone For Echo (For Reception)
Disable
It only shows, when ServiceBit = ON.
H/Modem Rate(For Tx)
33.6 Kbps
Sets the default value of the modem
transmission speed while the machine is
sending a fax.
H/Modem Rate(For Rx)
33.6 Kbps
Sets the default value of the modem
transmission speed while the machine is
receiving a fax.
Attenuator
10 dB, Range :
0-15 dB
Enter Attenuator.It only shows, when Ser-
vice Bit = ON.
Item
Factory
Default
Description
