Oki CX 1145 MFP User Functions Manual Download Page 21

Page: 21 / 238

Creating New Group

The following procedure describes how to create a new group in the Address Book.

Press the [USER FUNCTIONS] button on the control panel to enter the
User Functions menu.

Press the [ADDRESS] button, and then press the [GROUP] button on
the touch panel.

• The GROUP screen is displayed.

Press undefined button that you want to create a new group and
press the [ENTRY] button.

• The GROUP NO. REGISTRATION screen is displayed.

If the touch panel does not display an undefined group, press the [Next] button to display the next screen.

Press the [GROUP NAME] button.

• The input screen is displayed.

Summary of Contents for CX 1145 MFP















































































































































































































































Search results

Summary of Contents for CX 1145 MFP

Reviews:

Related manuals for CX 1145 MFP

Brands by name

Popular brands

Oki CX 1145 MFP, User Functions Manual

Search results

Summary of Contents for CX 1145 MFP

Reviews:

Related manuals for CX 1145 MFP

Brands by name

Popular brands