Oki CX 1145 MFP User Functions Manual Download Page 146

Page: 146 / 238

144

4.SETTING ITEMS (ADMIN)

3.SETTING NETWORK FUNCTIONS (Cont.)

To display the ADMIN menu, see “1.ENTERING TO ADMIN MENU”.

P.111

Press the [IPv6] button.

• The IPv6 screen is displayed.

Specify the following items as required.

•

IPv6 PROTOCOL

—Press the [ENABLE] button to enable the IPv6 protocol, or [DISABLE] button to disable

the IPV6 protocol.

•

LLMNR

—Press the [ENABLE] button to enable the LLMNR (Linklocal Multicast Name Resolution) protocol, or

[DISABLE] button to disable the LLMNR protocol.

•

ADDRESS MODE

—Select the [MANUAL] button.

•

Link Local Address

—The unique address used for the IPv6 is displayed.

• Link Local Address cannot be connected to another routed IPv6 network.
• The [ENABLE] and [DISABLE] buttons for the LLMNR protocol are available when you select the [ENABLE]

button for the IPv6 protocol.

Press the [Next] button.

• IPv6 (Manual/Stateful Address) screen is displayed.

Summary of Contents for CX 1145 MFP















































































































































































































































Search results

Summary of Contents for CX 1145 MFP

Reviews:

Related manuals for CX 1145 MFP

Brands by name

Popular brands

Oki CX 1145 MFP, User Functions Manual

Search results

Summary of Contents for CX 1145 MFP

Reviews:

Related manuals for CX 1145 MFP

Brands by name

Popular brands