manualshive.com logo in svg

OETIKER EPC 01, Instruction Manual, Page: 7 / 98

Share
Download
OETIKER EPC 01 Instruction Manual Download Page 7

7

www.oetiker.com

OETIKER EPC 01

basIC safeTy InsTRUCTIons

Issue 11.22

08905306

2 

Basic safety instructions

2 1  How to use the instruction manual

 

►

Make sure that this instruction manual is always available for use within easy reach.

 

►

If the device is sold, ensure this instruction manual is passed on to the next owner of the device.

 

►

Please read the instruction manual carefully before commissioning the ePC 01.

 

–

familiarize yourself with all settings and their functions.

 

–

anyone setting up, commissioning, maintaining or repairing the unit must have read and understood 
the instruction manual and in particular the safety instructions.

2 2  Intended use

• 

The ePC 01 with the associated oeTIKeR pincers is used exclusively for closing oeTIKeR clamps and 

• 

low-profile clamps with high process reliability.

• 

The ePC 01 must be used only as specified as intended use and when it is in a technically safe and fault-free 
condition.

• 

Intended use also covers observance of this instruction manual and compliance with the technical data. 

• 

The ePC 01 is designed for one-man operation. action by other persons to start of the closure cycle is pro-
hibited.

• 

The ePC 01 is designed for manual operation.

• 

The use of the ePC 01 in potentially explosive atmospheres or outdoors is not permitted.

• 

If the ePC 01 is used in an automated environment, the operating company is responsible for compliance 
with the applicable safety regulations. 

• 

any use not in accordance with the intended use shall be regarded as incorrect usage.

Usage other than intended use

The ePC 01 device is built to current state-of-the-art technology and is safe to operate. Residual hazards re-
main if the device is used incorrectly or by untrained personnel. The manufacturer cannot be held responsible for 
injuries to personnel and/or damage to property arising from the improper use of the ePC 01. In such cases the 
operating company shall be solely responsible.

2 3  General safety instructions

 

►

observe the operating instructions and maintenance instructions.

 

►

only qualified technicians shall be permitted to proceed with maintenance and repair tasks.

 

►

only persons who are familiar with it and have been informed about the dangers shall be permitted to use 
the ePC 01.

 

►

Compliance with all relevant accident prevention regulations, and generally accepted health and safety rules 
is mandatory.

Improvements to the machine

In our endeavor to continuously improve the quality of our products, we reserve the right to make improvements 
without changing the instruction manual. Details of dimensions, weights, materials, performance ratings and 
names may therefore be subject to necessary changes. Regarding electrical diagrams, the diagram supplied with 
the machine takes precedence in all cases.

Summary of Contents for EPC 01



































































































Reviews:

No comments