OETIKER EPC 01 Instruction Manual Download Page 29

Page: 29 / 98

www.oetiker.com

OETIKER EPC 01

sTRUCTURe anD ConneCTIon

Issue 11.22

08905306

5 3 Initial commissioning

ePC 01 set up and connected.

Documents supplied with licensing code.

1.  start the PC-software on the PC.
2.  switch on Control Unit. acknowledge error, if present.
3.  Connect PC to an interface of Control Unit (e.g. Usb).
4.  In the PC-software, navigate to menu page

Home > Control Unit >

Connect to Control Unit

5. select correct interface (e.g. Usb).
6. Press

Connect

button.

7. log in as Customer admin.

8. navigate to the menu page

Home > Control Unit >

Commands > Control Unit Licensing

9. enter the license code provided with your documentation

in the input field.

10. Press

Send

The transfer is successful if the connection is interrupted
and the connection view is displayed.

11. Reconnect Control Unit to PC-software.

12. navigate to the menu page

Home > Control Unit > Read

13. select

Create new local data set

14. enter a name for the data set in the input field.
15. Press

Read

16. Configure database with desired settings and send to

Control Unit.

Summary of Contents for EPC 01



































































































Search results

Summary of Contents for EPC 01

Reviews:

OETIKER EPC 01, Instruction Manual, Page: 29 / 98

Search results

Summary of Contents for EPC 01

Reviews: