manualshive.com logo in svg

OETIKER EPC 01, Instruction Manual, Page: 6 / 98

Share
Download
OETIKER EPC 01 Instruction Manual Download Page 6

6

www.oetiker.com

OETIKER EPC 01

InfoRMaTIon aboUT THIs ManUal

Issue 11.22

08905306

1 

Information about this manual

1 1  Symbols and meanings of the representations used

Various warning signs are used in this instruction manual to alert the reader about potential damage to property 
and personal injury.

 

►

Compliance with these warning signs is mandatory.

 

►

Compliance with instructions that are flagged with a warning symbol and text is mandatory.

The following symbols are used in this instruction manual:

 

situation will result in serious injury or death. 

   

 

situation could result in serious injury or death. 

   

 

situation could result moderate or minor injury. 

   

 

situations that at worst will result only in property damage 

 

 

 

and will not result in physical injuries.

Symbol

Meaning

 

►

...

single-step call to action

1.  ...
2.  ...
3.  ...

Multi-step call to action

 

►

note the sequence.

 

9

...

Requirement
• 

necessary or labor-saving steps for the successful execution of an action.

Connect

Display or operating elements of the menu or the PC software are highlighted. 

1 2  Scope

This instruction manual applies to all oeTIKeR electro-Pneumatic Controllers 01 (ePC 01) and describes the 
mode of operation as well as the correct commissioning, operation, decommissioning, recommissioning, storage 
and transport. This instruction manual contains important information for safe working procedures.
Maintenance information can be found in chapter 10.

1 3  Compatibility

some components of the oeTIKeR products ePC 01, elK 01 and elK 02 are compatible with each other. The fol-
lowing should be noted:
• 

The Trigger Unit of the elK 02 cannot be used as a hand-held tool.

• 

The Trigger Unit of the elK 02 can be used with the ePC 01, provided it is operated in semi-automatic or fully 
automatic mode.

• 

The Trigger Unit of the ePC 01 cannot be used with elK 01 and elK 02.

• 

The pincer body of the elK 02 can be retrofitted to the Trigger Unit of the ePC 01. 
Retrofitting is carried out after prior consultation with the local oeTIKeR service Center (

see chapter 14

).

Summary of Contents for EPC 01



































































































Reviews:

No comments