manualshive.com logo in svg

OETIKER EPC 01, Instruction Manual, Page: 25 / 98

Share
Download
OETIKER EPC 01 Instruction Manual Download Page 25

25

www.oetiker.com

OETIKER EPC 01

sTRUCTURe anD ConneCTIon

Issue 11.22

08905306

5 

Structure and connection

5 1  Prepare assembly and connection

5 1 1  Checking the ambient conditions

1.  ensure the required ambient conditions (

see chapter 13.1.1

).

2.  ensure that there is no potentially explosive atmosphere at the installation site.

5 1 2  Preparing the installation site

NOTICE

 

►

To avoid physical strain when operating the pincer vertically, provide a suitable suspension 
device at the installation site. The pincer is suspended from the suspension bracket on the  
Trigger Unit.

 

►

To avoid trip hazards, provide sufficient storage space for the hybrid hose at the setup loca-
tion.

 

►

observe the length of the hybrid hose at the installation site and do not change it (standard: 
3 m, optional: 6 m, 9 m, 12 m)

 

►

oeTIKeR el (T) pincer installed in a mounting fixture float. The floating bearing facilitates the 
closure process of the clamps and low-profile clamps. appropriate devices are available as 
options.

 

9

ambient conditions tested.

 

►

ensure that the installation site meets the following conditions:

 

–

sufficient space for the installation/removal of all components as well as for the operator›s work area

 

–

necessary connections for pneumatic and electric supply available

 

–

Good visibility of the display of the Control Unit for the operator

 

–

The power supply and compressed air supply can be disconnected at any time

5 1 3  Preparing the components for installation

 

9

assembly area prepared.

1.  Remove packaging materials completely. Do not remove transport or sealing covers until immediately before 

assembly.

2.  Check components for completeness, correctness and damage. Replace damaged components with original 

spare parts.

3.  ensure that compressed air lines and connections are free of objects.
4.  Provide compressed air supply or compressor (

see chapter 2.4.4).

5.  Provide a compressed air reservoir, 2 to 5 ltr reservoir volume is recommended.
6.  Read and observe the notes on assembly in the supplier documentation.

Summary of Contents for EPC 01



































































































Reviews:

No comments