manualshive.com logo in svg

OETIKER EPC 01, Instruction Manual, Page: 44 / 98

Share
Download
OETIKER EPC 01 Instruction Manual Download Page 44

44

www.oetiker.com

OETIKER EPC 01

PC-sofTWaRe

Issue 11.22

08905306

8 5 6  Pincer test

navigation: 

Home > Control Unit > Pincer Test

on the 

Pincer Test

 menu page, the pincer test is requested by pressing the 

Request

 button. Work using the pin-

cer must be interrupted in order to perform the pincer test.

If Cal 01 is used for the pincer test, the nominal force determined there can be entered in the 

Nominal force 

input

 field. Pressing the 

OK

 button sends the value to the Control Unit. If this is a repetition of the nominal force 

measurement, the new value can be sent to the Control Unit.

The pincer test can be 

authorized

 or 

denied

. authorization is available only if the 

Authorize the pincer test

 op-

tion is selected in the local data set (

see section «Edit pincer test settings» on page 56

).

NOTICE

Detailed information on the procedure of the pincer test and the description of the action steps 
are given in 

chapter 4.4

 described.

Fig  26:     

Pincer test menu

Summary of Contents for EPC 01



































































































Reviews:

No comments