manualshive.com logo in svg

OETIKER EPC 01, Instruction Manual, Page: 54 / 98

Share
Download
OETIKER EPC 01 Instruction Manual Download Page 54

54

www.oetiker.com

OETIKER EPC 01

PC-sofTWaRe

Issue 11.22

08905306

NOTICE

The firmware time of the Control Unit can deviate up to 6 minutes per day. Therefore, regular time 
synchronization is recommended for data storage.

If an nTP server is used, it must be included in the same network as the Control Unit

Editing clamping settings

navigation: 

Home > Local data set > Settings Control Unit > Closing

The following 

General closing settings

 are made on the 

Closing

 sub-menu page:

Element

Description of the setting

Start 
(Type of 
triggering)

select the type of triggering.
• 

START

 button on the triggering unit

• 

external control: If the start signal is sent from a external control, this must be selected 
here. With this option, the safety valve must be actively mechanically locked by a lock-
ing ring recommended by oeTIKeR (

see chapter 9

).

• 

START

 button on the Trigger Unit and external control jointly

Input control

select the source of the start signal.
• 

Control Unit: operation via the Rotary pushbutton

• 

X20: operation via digital signals of the X20

• 

Industrial network: operation via the selected bus system (ethernetIP, etherCaT,  
Profinet)

Fig  41:     

Closure sub-menu

Summary of Contents for EPC 01



































































































Reviews:

No comments