manualshive.com logo in svg

OETIKER CC 20, Instruction Manual, Page: 41 / 58

Share
Download
OETIKER CC 20 Instruction Manual Download Page 41

 

 

Clamp pincer CP 10 / CP 20 / CC 20 

7 Description of PC software 

Issue 06.19 

08902961 

7-41 

7.2 

Status menu 

• 

Display of the closure force curve (progression of the closure force over time) of the most recent closure or 
any selected closure.

 

• 

Display of the process data for the most recent closure or any selected closure. 

 

Fig. 32:  Status menu 

Input field/Display field/Option 
field 

Description 

Closure force 

The graphic displays the progression of the closure force over time for the 
selected closure operation. When closure has been performed correctly, 
the summit of the curve must lie within the green shaded area. 

If this is not the case, contact your service partner without delay. 

Comment 

For input of user-defined texts (maximum 10 lines). The comments refer 
to the selected closure operation and are included in the single report for 
that closure, but not in the multiple report (see below for an explanation). 
The text is not saved in the device. 

Single report / Multiple report 

The closure force diagram for a closure operation, together with other 
process data, can be called up by pressing the buttons “Single report” 
(documentation of 

an individual closure operation) or “Multiple report” 

(collective documentation of several closure operations). 

(See chapter 5.3, p. 5-31). 

Summary of Contents for CC 20



























































Reviews:

No comments