Clamp pincer CP 10 / CP 20 / CC 20
6 Maintenance and repair
Issue 06.19
08902961
6-37
NOTE
Damage to the clamp pincer by fitting unauthorized parts!
Only use original OETIKER pincer jaws. Only fit the designated pincer jaw type in the pincer head.
1. Remove the battery.
2. Unscrew the union nut (Fig. 25/2).
Fig. 25: Unfastening the pincer head
3. Disconnect the pincer head (Fig. 26/3) from the
clamp pincer (Fig. 26/4).
The plunger (Fig. 26/2) stays in the clamp
pincer (Fig. 26/4).
Fig. 26: Disconnecting the pincer head from the clamp
pincer
4. Remove two lock Fig. (Fig. 27/6) on pincer
head (Fig. 26/3).
Do not push back pin (Fig. 27/7)!
5. Unscrew two hexagon nuts (Fig. 27/8) from the
hexagon bolts (Fig. 27/5).
Fig. 27: Dismantling the pincer head