34
GA 09.035/6.02 - 07/2011 - © Oerlikon Leybold Vacuum
Operation
Tab. 4-3
Parameter groups and their parameters
The available parameters are subdivided into the following parameter groups:
Switching function parameters (
PArA SP
)
These parameters are used to assign pressure dependent switching functions
to the channels. The switching points 5 and 6 are only available in the CEN-
TER THREE. See Chapter 5.1 Switching function parameters (PArA SP),
Sensor parameters (
PArA SEn
)
These parameters concern the transmitter on the currently selected channel
only. There is an individual set of parameters for each channel. See
Chapter 5.2 Sensor parameters (PArA SEn),
General parameters (
PArA GEn
)
These parameters are used for general configuration of the unit. The parame-
ters affect all channels. See Chapter 5.3 General parameters (PArA GEn),
Test parameters (
PArA tESt
)
This parameter group is used to check individual system functions. The
parameter group is not required during normal operation. For this reason it
must be accessed in a special way. See Chapter 5.4 Test parameters (PArA
tESt),
PArA
tESt
Pnr
dt-C
tr-L
LoC
rA-t
EP-t
EE-t
di-t
Ad-S
Ad-i
CALib
io-t
rS-t
Parameter group
Parameters
