32
GA 09.035/6.02 - 07/2011 - © Oerlikon Leybold Vacuum
Operation
4.4.3.7
Identifying a transmitter
1
Keep the UP and DOWN buttons pressed for approximately 1 second
Fig. 4-6
Press the UP and DOWN buttons for 1 second
The display area of the individual channels shows the connected transmitters.
See Tab. 4-2,
32.
Tab. 4-2
Transmitter identification
Note:
In the case of ITR transmitters, the software version number of the sen-
sor is also shown (e.g. 1.20).
Display
Significance
ttr
THERMOVAC (TTR)
ttr1
THERMOVAC (TTR 100, TTR 101)
Ptr
PENNINGVAC (PTR 225)
Ptr90
PENNINGVAC (PTR 90)
Ctr
CERAVAC (CTR 90, CTR 91, DI
200, DI 201, DI 2000, DI 2001, DI
2001 rel)
Ctr1
CERAVAC (CTR 100, CTR 101)
itr
IONIVAC (ITR 90)
itr2
IONIVAC (ITR 200)
noSEn
No transmitter found
noid
No transmitter identification found
