Octagon PC-500, User Manual

Page: 148 / 233

20-5
PC-500 user’s manual Managing SSDs
In the above example, SSD1 is the first SSD which means TESTRFA is
socket 0, and SSD0 is the second SSD which means TESTRFA is
socket 1.
2. Execute TESTRFA /Sn where n is the socket determined in step 1. For
SSD0 in the above example, enter:
TESTRFA /S1 /E
For SSD1 in the above example, enter:
TESTRFA /S0 /E
≡
Making copies of the PC-500 SSD
GETIMG.EXE is used to capture an image from an existing PICO FA
drive. This is used to program SSD drives on other target systems from
one “development” system.
1. To make a copy of the PC-500 to a local file, enter:
GETIMG SSD1 <filename>
2. To make a copy of the PC-500 SSD to a remote file:
a. Establish serial communications between the PC-500 and the desk-
top PC using SmartLINK.
b. On the PC-500 enter:
GETIMG SSD1 <filename>/COM1
c. On the desktop PC:, exit SmartLINK by pressing <ALT><X> and
then enter:
GETIMGH <filename>/COM1
d. Write the image, <filename>, to the host drive.
≡
Programming copies of the PC-500 SSD
PGMIMG.EXE is used to program an image from an existing PICO FA
drive to other SSDs on target systems.
1. Run GETIMG.EXE to make a copy of the PC-500 SSD to a local file or
GETIMGH.EXE to make a copy of the PC-500 SSD to a remote file.
Refer to the above section, Making copies of the PC-500 SSD.
2. To program a copy of the PC-500 image to a target system from a host
system: