ADJUSTMENTS AND
MAINTENANCE
UT-MT-0812_2.0_24-01-2023 (EN)
Use and Maintenance Manual
LERA
49
Place the glass complete with gasket in the front gasket seat (fastened to the frame).
Respect the direction of the glass during assembly phase. Match the supply point with the
lower part of the front frame (in correspondence of OCEM logo).
Bring the front frame closer to the fixture body and connect the supply cables of the resistance. Insert the cables
in the lower opening of the LED module and close the fixture.
Completely insert the cables inside the cavity when coupling the parts.
Do not touch the inner part of the glass to avoid leaving dirt or residue.
Check that the gasket and the glass do not move from their location during closing operations.
Screw the four locking screws and tighten to the indicated tightening torque.
