GENERAL
INFORMA
TION
UT-MT-0812_2.0_24-01-2023 (EN)
Use and Maintenance Manual
LERA
6
1.2
Manual reference guide
This document contains all the information related to the equipment and describes the procedures to follow during
the installation of the product and during ordinary maintenance. The document is indented for all operators that
must intervene on the equipment.
This document does not replace in any manner applicable laws, rules or regulations, included the
standards FAA and ICAO.
The precautions provided in the manual are always preceded by a symbol as illustrated below:
Indicates the warnings, the notes, the suggestions and other points on which is intended to
draw the attention of the reader.
Indicates the operations to be carried out mandatorily or the information which should be
carefully read to avoid possible risks.
Indicates particular risks connected with the power supply. It reports the operations to be
carried out mandatorily or the information which should be carefully read to avoid possible
risks.
These precautions safeguard the personal security of everyone who work on and/or are in proximity of the equipment
and of the relative supply circuits.
The failure to comply with the instructions (in particular those preceded by danger, warning, caution
precautions) can cause serious injury or death.
1.3
Safety instructions
CAREFULLY READ THIS DOCUMENT.
The improper use of the equipment or the failure to comply all the precautions indicated
implies life danger and serious injury to persons and damages to things.
HAZARD OF ELECTRICAL SHOCK, EXPLOSION OR ELECTRIC ARC
Carefully read the enclosed documentation before installing or starting to use the equipment.
Do not install the equipment until the completion of all construction works required to carry
out the work.
DO NOT OPERATE ON POWERED CIRCUITS
Do not carry out any operation on powered circuits.
Before every access, inspection or intervention on the equipment, ensure to have switched off the
equipment by opening the main power switch and by removing the supply from the unit (open the
power switch at the beginning of the line or switch off the constant current regulator).
The failure to comply all the precautions indicated implies life danger and serious injury to
persons.
